Featured Transports

Search Past Featured Transports by Hal

Filter our past transports and find your make/model.


	Steel Beams & Misc Hardware Load hauled on a hotshot trailer Shipping From: Castle Hayne, NC 28429 Transporting To: Boise, ID Specs: 13 Steel; 1 Pallet ; 20,000lbs, 24L X 4W
	Caterpillar 323 Excavator near Birmingham, AL to Carlsbad, NM Hal at Heavy Haulers recently hauled this Caterpillar 323 Excavator for a client. This Caterpillar Excavator was picked up in near Birmingham, AL to Carlsbad, NM. This client called in needing an immediate pick up in Alabama after the original company that was hired could not produce a trailer for the clients freight. Hal was able to secure a driver and trailer within 3 hours.
	Hauling a Full Flatbed of Forklifts from Chicago, IL to Fontana, CA Shipping From: Chicago, IL Transporting To: Fontana, CA Specs: 2002 Forklift Flatbed; 48L x 8W x 8H; 30,000lbs
	Milling Machines Hauled on a Conestoga Covered Trailer Shipping From: New Johnsonville, TN 37134 Transporting To: Castle Hayne, NC 28429 Specs: (3) 7L X 6W X 6H
	Hauling a Grove 620 Crane This Grove crane was picked up in Owosso, MI and delivered in Momence, IL. It measured 36 feet in length, 8 feet 2 inches wide, 9 feet 11 inches tall and weighed approximately 49,000 pounds.
	Powerscreen Chieftain Loaded For Transport This 2007 Powerscreen Chieftain crusher was Hal Foster's overweight load to haul from Channing, Texas, to Lakeland, Florida. He loaded it onto a heavy haulers RGN trailer that could handle its 78,000-pound weight while having the oversized capacity for its 10 ft. width. Sam Duncan and his load handling team had a tough time in the pouring Florida rain but succeeded in delivering the 62.4 ft. long and 13.8 ft. high 2007 Powerscreen Chieftain Crusher within schedule.
	Dump Truck Transport: Ford LN800F Dump Truck Shipping From: Shrewsbury, MA Transporting To: Concord, NC Specs: 1997 Ford LN8000F Dump Truck 22000# 20L 8.5W 10H
	The Rocky Crusher Being Transported This 2010 Powerscreen Chieftain crusher was Hal Foster's overweight load to haul from Channing, Texas, to Lakeland, Florida. He loaded it onto a heavy haulers RGN trailer that could handle its 78,000-pound weight while having the oversized capacity for its 10 ft. width. Sam Duncan and his load handling team had a tough time in the pouring Florida rain but succeeded in delivering the 62.4 ft. long and 13.8 ft. high 2010 Powerscreen Chieftain Crusher within schedule.
	Shipping an international 4400 bucket truck from Charlotte, MI to Des Moines, IA Shipping From: Charlotte, MI Transporting To: Des Moines, IA Specs: 2009 International 4400 bucket truck; 29L x 8.6W x 12.5H; 26000lbs
	Transporting a 2015 Ford F-59 Truck on a Hot Shot Trailer Heavy Haulers has the proper equipment for every job and the owner of this rolling chassis was impressed with not only how quickly our driver arrived but also the condition of our rigs plus he enjoyed the only two jokes the driver knows and shared with him (jokes vary by driver). When your vehicle is important to you make sure you call the company that values your valuables. Heavy equipment? No problem. No wheels? We’ll figure it out.
	Ford F-100 Water Truck Shipped on RGN Trailer Shipping From: Long Beach, CA 90802 Transporting To: Brookings, OR 97415 Specs: 1997 Ford F-700 Water Truck; 15L X 8.5W X 9H; 20,000lbs
	Hauling a Freightliner Day Cab Truck to Florida Shipping From: Allentown, PA Transporting To: Pahokee, FL Specs: 2015 Freightliner Cascadia Day Cab 18000# 22L 8.5W 10.5H
	25,000 pound Sterling SC8000 Street Truck Transported to MA This Sterling SC8000 Street Sweeper was shipped from Fort Pierce in Florida to Everett, Massachusetts by Hal Foster; a specialist equipment shipping specialist. The 25,000-pound street sweeper had a length of 24 ft. and a height of 10.5 ft. which required a capacity handling Heavy Haulers RGN trailer. Hal and his Heavy Haulers load handlers tied down the 8.5 ft. wide Sterling SC8000 Street Sweeper for the 1370 mile journey.
	International Cab and Chassis Transport from MI to TN Shipping From: Grand Rapids, MI Transporting To: Covington, TN Specs: 2013 International Cab and Chassis; 32L x 8W x 9H; 12,000lbs
	Caterpillar 140M Motor Grader transported from Colorado to Pennsylvania Shipping From: Colorado Springs, CO Transporting To: Allentown, PA Specs: 1984 CAT 140M motor grader; 29L x 8.1W x 10.9H; 44000lbs
	JCB Telehandler Transported on an RGN Trailer from Newnan to Augusta, GA Hal Foster, a Heavy Haulers JCB equipment shipping expert, hauled this 29,000 pound JCB Telehandler intrastate in Georgia on an RGN trailer. He valuated the telehandler's 28 ft. length, its 8.9 ft. width and 8.3 ft. length and used the heavy capacity trailer to simplify its loading and conveyance. Within four and a half hours after it was picked up, the 2012 JCB 510-56 Telehandler was delivered safely in Augusta much to the client’s relief.
	John Deere 350G LC Excavator Transported From Humble, TX to Oakland, CA When Hal Foster from Heavy Haulers got the call to ship this John Deere 350G LC Excavator, he loaded the 77,000-pound load onto an RGN trailer. He shipped the 40 ft. long excavator from Humble, Texas to Oakland, California; 1,926 miles away along the US border with Mexico. The 11.2 ft. wide John Deere 350G LC Excavator required permits, flagging and escort vehicles for traffic management on the busy I-10 W.
	John Deere 3320 Tractor on a Hotshot Trailer Form Colorado to Wyoming These two John Deere 3320 Tractors were transported on a hotshot trailer from fort Collin, Colorado to Casper, Wyoming by Heavy Haulers’ tractor moving specialist, Hal Foster. The 12.5 ft. long tractors had a combined weight of 7, 400 pounds and Hal loaded them onto a hotshot trailer. Each 3,700 pound John Deere 3320 Tractor was 8 ft. long by 8 ft. wide, and chains secured the load. This tractor duo was delivered 4 hours and 32 minutes later after a 233-mile drive along the I-25 N.
	Transporting an Oshkosh M-ATV Military Truck to Arizona from Texas The hauling of this 29,000 pound Oshkosh M-ATV Military Truck from new Boston, Texas to Avondale in Arizona was completed by Hal Foster from Heavy Haulers. A military vehicle and equipment transport specialist, Hal Foster loaded the 20.1 ft. tall Oshkosh M-ATV truck onto a Heavy Haulers double drop trailer that accommodated its 9.6 ft. height. Once loaded and prepped, the 8.5 ft. wide M-ATV was shipped 1237 miles on the I-20 W and I-10 W for a conclusive cross-state delivery.
	Oshkosh M-ATV loaded for transport from Texas Shipping From: New Boston, TX 75570 Transporting To: Avondale, AZ 85323 Specs: Oshkosh M-ATV;20.1L X 8.5W X 9.6H; 29,000lbs
	Transporting a Volvo EC250EL Excavator from SC to LA Shipping From: Georgetown, SC Transporting To: Minden, LA Specs: 1 Volvo EC250EL excavator; 34L x 11.6W x 11.4H; 60,000lbs
	Shipping a Link-Belt 160X-3 Excavator Shipping From: Elliotsburg, PA Transporting To: Greenville, NH Specs: 2015 Link-Belt 160X-3 excavator; 29L z 8.6W x 10.5H; 38,000lbs
	Hyundai R55 midi excavator hauled to California This Hyundai R55 Excavator was shipped by Hal Foster from Roseville to Aliso Viejo, California. Hal Foster from Heavy Haulers loaded the 13000-pound mini excavator onto an RGN trailer for the journey, which was the perfect fit for the 20 ft. long, 6.3 ft. wide and 8.4 ft. high load. The Hyundai R55 midi excavator load was tied down with chain rigging for the 423-mile route, and Hal Foster checked the securing every after 50 miles.
	Mine resistant ambush protected (MRAP) vehicle on an RGN Trailer Hal Foster from Heavy Haulers picked up this 29,000 pound Oshkosh M-ATV and hauled it on an RGN Trailer from New Boston, Texas to Avondale, Arizona. The 9.6 ft. high and 20.1 ft. long Mine Resistant Ambush Protected (MRAP) vehicle was loaded onto while Hal Foster oversaw the entire process. Once loaded, the 8.5 ft. wide Oshkosh M-ATV was tied down for shipping through 455 miles of the I-90 E.
	1998 Stewart & Stevenson M1078 Hauled on a flatbed trailer This 10 ft. high 1998 Stewart & Stevenson M1078 was shipped intrastate from Seattle to Tacoma, in Washington State by Travis; a Heavy Haulers logistics manager and load specialist. This M1078 military truck weighed 34,000 pounds and had a width of 8.5 ft. which did not necessitate permits. After arranging for its transport insurance, Travis loaded the 25 ft. long 1998 Stewart & Stevenson M1078 onto a Heavy Haulers flatbed trailer with chains securing it onto the high deck above the rear axles.
	29,000lbs MRAP vehicle transported on an RGN Trailer This 29,000lbs MRAP vehicle was shipped to Avondale, Arizona from New Boston, Texas by Hal Foster and the experienced Heavy Haulers military equipment handlers. Hal Foster loaded the 9.6 ft. high Oshkosh M-ATV onto an RGN trailer from that had the capacity for its 29,000-pound weight, and 8.5 ft. width. Since the 20.1 ft. long MRAP vehicle was below weight limit while also just within the width allowances Hal Foster didn’t need permits for the 653-mile journey.
	Mini Excavator Shipped From Virginia to New York On an RGN Trailer This 2014 Doosan DX85R-3 Mini Excavator was shipped by Hal Foster from Warrenton Virginia to Averill Park New York. Hal loaded the 19,000-pound mini excavator onto an RGN trailer for the journey, which was the perfect fit for the 21 ft. long, 7.6 ft. wide and 8.6 ft. high load. The load was tied down with chain rigging for the 423-mile route and Hal Foster checked the securing every after 50 miles.
	Montana Transport: Kobelco Excavator Shipping From: Dover, NH Transporting To: Polson, MT Specs: 1997 Kobelco SK 400 44000# 21L 10.8W 11.4H
	Caterpillar 140 M2 Motor Grader Hauled from North Dakota to Washington This 44,000lb Caterpillar 140 M2 motor grader was shipped from North Dakota to Washington by Hal Foster, who picked it up at Arnegard. The motor grader had a width of 8.8 ft. and length of 30 ft. but since the weight was below the limit, the load didn't require oversize permits, escort vehicles or flagging as an oversize load. Hal Foster and the Heavy Haulers load handlers loaded the Caterpillar 140 M2 Motor Grader onto an RGN trailer that accommodated its 10.8 ft. height for delivery to Inchelium, Washington.
	Caterpillar 12H Road Grader - Shipped On a Hotshot Trailer Hal foster took on the shipping of this 1997 Cat 12H Motor Grader that weighed 32,000 pounds and had a width of 8 ft. The transport was scheduled for Brooklet, Georgia from Wilson, North Carolina; and the motor grader's width of 8 ft., length of 28 ft. and height of 10.5 was sufficient for loading onto a hotshot trailer. Hal Foster and his Heavy Haulers load handlers delivered the Cat 12H Motor Grader after a 363-mile route journey.
	Moving an excavator from Washington to Nebraska Shipping From: Chehalis, WA Transporting To: Lincoln, NE Specs: 1 Doosan DX85R excavator 20000# 21L 7.5W 7.2H
	Trolley transported from New Mexico To Texas Shipping From: Roswell, NM Transporting To: Grapevine, TX Specs: 1984 Chance Trolley: 26L 8.6W 11.3H; 24,000 lbs
	Hauling a Liebherr Excavator from Pennsylvania to New York Shipping From: Littlestown, PA Transporting To: Huntington, NY Specs: 2012 Liebherr A904 4 LITRONIC WHEELED EXCAVATOR #44500 32.1L 8.5W 10.5H
	Caterpillar Motor Grader Shipped from Arnegard, ND to Inchelium, WA This 44,000 pound Caterpillar 140 M2 Motor Grader with a width of 8.8 ft. was shipped by Hal Foster from Arnegard, North Dakota and delivered securely in Inchelium, Washington state. The motor grader was 8.8 ft. wide, 10.8 ft. high and 30 ft. long, prompting Hal to use a specialized RGN trailer for its transport. Once loaded, the shipment was tied down securely and shipped 929 miles via the I-90 W for safe and timely delivery.
	Shipping a Fire Truck from North Dakota to Virginia Shipping From: Dickinson, ND Transporting To: New Castle, VA Specs: 1989 Pierce Arrow Pumper Tanker 43000# 34L 8.5W 11.2H
	Shipping a Garbage Truck from Oregon to Texas Shipping From: Medford, OR Transporting To: Hidalgo, TX Specs: 2010 Peterbilt 320 32L 8.5W 11.6H
	Peterbilt 348 Dump Truck Transported on a Hotshot Trailer Shipping From: Pompano Beach, FL 33069 Transporting To: Seaside, CA 93955 Specs: 2011 Peterbilt 348 Dump Truck; 26L X 8W X 10H; 22,000lbs
	Transporting 2006 John Deere 710G backhoe from Portland, Oregon to Brighton, CO. Trust in the professionals at Heavy Haulers to get your next load on the road! This is a 2006 John Deere 710G backhoe that was transported from Portland, Oregon to Brighton, CO. This John Deere Backhoe was 31 feet long, 8 feet wide, 10 feet high and weighed approximately 27,000 pounds.
	5th Wheel Trailer Using Our Power-Only Service Shipping From: Midland, TX 79706 Transporting To: Pecos, TX 79772 Specs: 5th Wheel Trailer; 53L 8.6W 13.2H; 35,000lbs
	2017 Oak Creek Mobile Home Model F1460 Transport Shipping From: Baton Rouge, LA 70814 Transporting To: Dulce, NM 87528 Specs: 2017 Oak Creek Mobile Home Model F1460;64L X 14W
	Hauling a Mercedes LWB Sprinter Van from Massachusetts to South Carolina Shipping From: Somerville, MA Transporting To: Charleston, SC Specs: 2019 Mercedes-Benz Sprinter LWB Van Extd. Length
	1500 Maruka Buggy Transported on a Step Deck Trailer Shipping From: South Vienna, OH 45369 Transporting To: Bossier City, LA 71111 Specs: 1500 Maruka Buggy; 18L X 8.6W X 9.6H; 23,000lbs
	Shipping a Ford F550 Truck to Texas Shipping From: Gretna, VA Transporting To: Irving, TX Specs: 2019 Ford F550 Truck; 25L X 8W X 9H; 10,000lbs
	Shipping a John Deere Excavator From Humble, TX to Oakland, CA Our equipment shipping specialist at Heavy Haulers, Hal Foster was contracted to transport this 77,000 pound John Deere 350G LC Excavator after the client saw him perform a previous similar consignment. Hal Foster sourced permits and insurance within the hour and loaded the 11.2 ft. wide load onto a Heavy Haulers RGN trailer. The 40 ft. long and 10.4 ft. high excavator was picked up in Humble, Texas and delivered 1,926 miles away in Oakland, California.
	Shipping a Press Brake Machine On a Lowboy Trailer Charlie had the greatest problem a successful company comes across ...growing pains. Forced to purchase another press brake to handle the workload, he needed the heavy machinery put to work as quickly as possible. Heavy Haulers understands the demands of your customers and it reflects in the way we handle your demands as our customer. Need to haul something with no wheels? ...No matter if the wheels fell off or if the wheels are not even an option, it’s no problem at all Heavy Haulers hauls it all! Whether small or large, wheeled or boxed, new or classic, lite or heavy, Heavy Haulers is always ready.
	Shipping a Tiny Home in Illinois Shipping From: South Elgin, IL Transporting To: Oswego, IL Specs: 1986 Mobile Home 14W 64L
	Ford F-100 Water Truck Hauled on RGN Trailer This 20,000 pound 1997 Ford F-700 Water Truck was hauled on an RGN Trailer by Hal Foster from Heavy Haulers. The load was picked up from Long Beach, California to Brookings, Oregon, and this 15 ft. long and 8.5 ft. wide Ford F-100 Water Truck was shipped 632 miles after being secured with chain tie-downs. This 9 ft. high transport took less than the estimated time for delivery in Oregon State despite traveling at a careful speed.
	Transporting a Water Truck to Iowa on an RGN trailer Hal Foster, a Heavy Haulers water truck shipping specialist, undertook the logistics for this 8.5 ft. wide and 20,000 pounds 1997 Ford F-700 Water Truck. The 15 ft. long and 9 ft. high water truck required permits for height oversize, after which it was loaded onto a Heavy Haulers RGN trailer hooked onto a heavy-duty truck at Long Beach, California, for delivery in Iowa. Clear skies and low traffic allowed the delivery of this water truck to fall within the client’s stipulated deadlines.
	Water Truck Shipping Services with Heavy Haulers Shipping From: Long Beach, CA 90802 Transporting To: Brookings, OR 97415 Specs: 1997 Ford F-700 Water Truck; 15L X 8.5W X 9H; 20,000lbs
	Mobile Office Hauled using power only services Shipping From: Philadelphia, PA Transporting To: Rio Linda, CA 95673 Specs: 40L X 10W X 12H; 14,000lbs